Defectoscopy

Computer vision-based solution

Computer vision

Non-destructive visual inspection of products is carried out using a computer vision system.
  • Speeds up to 200 m/min
    Applicable directly on the production line at speeds up to 200 m/min
  • Defect detection
    Defect detection without changes to the technological process
  • 1x1 mm
    Detection of defects as small as 1×1 mm

Hardware

Line matrix camera
4 kpx resolution in 6600 frames per second mode
LED backlight unit
Power: 30 W/m
Industrial Controller
Ability to connect to the conveyor line arm, can be connected with a frame grabber

Results

  • Defect detection
    Detection of defects with linear dimensions starting from 1×1 mm. Detection of smaller defects is possible when using special optics.
  • Real-time mode
    Real-time defect detection and classification
  • Signaling
    The possibility of sending a signal to direct defective pages to a separate queue
  • Various materials
    Possibility of use on lines with various sheet materials — GVL, metal
Submit a request for
a consultation
Mon-Fri 10:00–19:00